File (metalwork)

A File (or Hand-File) is a metalworking hand tool used to shape material by abrasion. A file typically takes the shape of a steel bar, most of which is covered with an array of crisscrossing steel ridges. One end of the bar, called the tang, is pointed and narrow and attaches to a round handle. Files should never be used without a handle, as the pointed tang can easily injure the operator.

Files come in a wide variety of sizes, shapes, and tooth sizes. File cross-sections can be flat, triangular, round, or half-round to suit the workpiece shape. Files can be very large and course (such as a rasp) or small and fine (such as a #Needle Files).

Files have forward-facing cutting teeth, which means that the file only effectively cuts when pushed over the workpiece. Pulling a file over a workpiece or rapidly scraping a file back-and-forth is ineffective and will reduce the life of a file.

Diamond Files

Instead of having teeth cut into the files working surface, diamond files (pictured to the right) have small particles of Diamond#Industrial_diamond_industry embedded in their surface (or into a softer material that is bonded to the underlying surface of the file). The use of diamonds in this manner allows the file to be used effectively against extremely hard materials, materials that would blunt an ordinary high carbon steel file quickly.

Needle Files

The image to the left shows a selection of needle files in an assortment of cross sectional shapes.
A set usually consist of 12 files that are packaged in a soft pouch, both for ease of handling and protection of the files teeth. They are small files that are used in applications where the surface finish takes priority over metal removal rates but they are most suited for smaller work pieces.
They are often used as pictured however, like all files, they are safest when used with a handle. The handle is often designed around the collet principle which allows the files and handle to be interchanged quickly.

Riffler Files

Riffler files, as pictured to the right, are small to medium sized files in an assortment of cross sectional shapes and profiles. The varying profiles and shapes enable them to be used in hard to reach, or unusually shaped areas. They are often used as an intermediate step in die making where the surface finish of a cavity die may need to be improved. - eg; Injection_moulding or Die_casting#Die_Casting

Machine Files

The files pictured on the left are designed for use in a filing machine.
A filing machine is similar in appearance to a scroll saw or band saw in that the file is mounted vertically in the middle of a table. When in operation the file reciprocates vertically while the workpiece is presented to the file's face and manipulated around the table/file as desired.
The cone point of the pictured, top two files allowed the files to center themselves firmly in the bottom file holder, the pictured, lower two files were required to be inserted into the bottom file holder and physically restarined with set screws, an identical process as for the top holder.

They are a useful machine as they reduce fatigue and improve product accuracy and while not seen in production environments they were often used in toolrooms or Molding (process) shops to assist in the manufacture of specialist tooling.


Home Articles Construction Tools Woodworking Store Tools Furniture Bathroom Flooring	File (metalwork) A File (or Hand-File) is a metalworking hand tool used to shape material by abrasion. A file typically takes the shape of a steel bar, most of which is covered with an array of crisscrossing steel ridges. One end of the bar, called the tang, is pointed and narrow and attaches to a round handle. Files should never be used without a handle, as the pointed tang can easily injure the operator. Files come in a wide variety of sizes, shapes, and tooth sizes. File cross-sections can be flat, triangular, round, or half-round to suit the workpiece shape. Files can be very large and course (such as a rasp) or small and fine (such as a #Needle Files). Files have forward-facing cutting teeth, which means that the file only effectively cuts when pushed over the workpiece. Pulling a file over a workpiece or rapidly scraping a file back-and-forth is ineffective and will reduce the life of a file. Diamond Files Instead of having teeth cut into the files working surface, diamond files (pictured to the right) have small particles of Diamond#Industrial_diamond_industry embedded in their surface (or into a softer material that is bonded to the underlying surface of the file). The use of diamonds in this manner allows the file to be used effectively against extremely hard materials, materials that would blunt an ordinary high carbon steel file quickly. Needle Files The image to the left shows a selection of needle files in an assortment of cross sectional shapes. A set usually consist of 12 files that are packaged in a soft pouch, both for ease of handling and protection of the files teeth. They are small files that are used in applications where the surface finish takes priority over metal removal rates but they are most suited for smaller work pieces. They are often used as pictured however, like all files, they are safest when used with a handle. The handle is often designed around the collet principle which allows the files and handle to be interchanged quickly. Riffler Files Riffler files, as pictured to the right, are small to medium sized files in an assortment of cross sectional shapes and profiles. The varying profiles and shapes enable them to be used in hard to reach, or unusually shaped areas. They are often used as an intermediate step in die making where the surface finish of a cavity die may need to be improved. - eg; Injection_moulding or Die_casting#Die_Casting Machine Files The files pictured on the left are designed for use in a filing machine. A filing machine is similar in appearance to a scroll saw or band saw in that the file is mounted vertically in the middle of a table. When in operation the file reciprocates vertically while the workpiece is presented to the file's face and manipulated around the table/file as desired. The cone point of the pictured, top two files allowed the files to center themselves firmly in the bottom file holder, the pictured, lower two files were required to be inserted into the bottom file holder and physically restarined with set screws, an identical process as for the top holder. They are a useful machine as they reduce fatigue and improve product accuracy and while not seen in production environments they were often used in toolrooms or Molding (process) shops to assist in the manufacture of specialist tooling.
This content from Wikipedia is licensed under the GNU Free Documentation License Site Copyright © 2004-2005 Home Improvement Online. All rights reserved.